Tbs pro gimbal

[UNCLEARCHIE]

Hi all long time browser first post on here.

Got my tbs pro recently and built up fine, now I';m having issues getting the gimbal to work as it should.

I have flashed and re calibrated as per team black sheeps website instructions.

But it stutters and when It rolls to the right it reaches a certain point and bounces back to the opposite way.

Also the tilt is not working what so ever.

Is there any one here who can help me as I be spent hours trying to get this to function correctly

[Cockney Boy]

Have you made sure you have the roll and pitch motors in the correct sockets?

Also what gimbal software and firmware you using?

Version 2.1 is what you should you using

And where are you?


Sent from my iPad using Tapatalk HD

[UNCLEARCHIE]

I';ve got it on 2.1 software with profiles loaded from tbs website but still getting stutter.

I';m located in South manchester

[Cockney Boy]

Can you move the pitch motor while holding the Pro frame? If you are getting a slight movement then the micro screw that pins the frame to the motors shaft is either lose or not located onto the flat part of the shaft.

If everything seems tight on the motors and frame then I';d try a new IMU.


Sent from my iPad using Tapatalk HD

[UNCLEARCHIE]

Thanks Cockney boy .  I tightened the grub screws and the pitch is working as it should.
The only issue now is when it rolls either way to the max it stutters. Is there a fix for this?

[Cockney Boy]

What you set the pitch and roll power settings to in the software?

[UNCLEARCHIE]

175 and 135 as per the setup from tbs profiles off their site

[Cockney Boy]

There the same as mine. I';ll fire mine up today and see if it does the same