How to reset the Rabbit

[Gaza07]

heres a small doc on how to reset the rabbit flight controller if your having problems uploading firmware 

[attachurl=1]

[Tim]

New on this,
I have just got a rabbit controller and was uploading the latest firmware,halfway through it failed and said to start again.
When I tried to start again by connecting the USB cable all the lights lit up together and stayed on, also with a continuos beep
Any suggestions on what to do?

[Gaza07]

Hi Tim and welcome to the forum if you download the file above it shows you what 2 pins to connect together to put the rabbit in to reset mode, once you have the 2 pins connected power the rabbit and upload the firmware while the wire is still connected, once the firmware has uploaded turn the power off and remove the wire, and then you should be able to use the rabbit gui as before and set your rabbit up, please feel free to post any pictures of your copter or videos you might have   

Please feel free to ask for as much help as you need 

[craig t]

is this the same for the rabbit ii fc?

[Gaza07]

I never had a rabbit 2 so dont know sorry