Motor advise

[Rappy Freak]

I am looking for some motors for my CarbonCore 650 and was wondering if any one had any ideas?  I am using TBS escs and will be running 4s batteries.  Not wanting to break them bank too much, but I know they will not be over cheap.   

Forgot to add I will be running 11" props 

[guest325]

If you don';t want to spend too much these may be of interest:
http://www.hobbyking.com/hobbyking/store/__36822__Turnigy_Aerodrive_SK3_2836_1040kv_Brushless_Outrunner_Motor_UK_Warehouse_.html
SK3 motors are made on the same production line as Hacker motors and are very good quality, not sure this is the exact size you require but I wouldn';t think it';s too far off the mark.

[Biffa]

I have to say that appart from the one I had with a broken winding, the blue RCtimer motors are very good for the money. If you can stomach the wait from China and all that.

http://www.rctimer.com/product_859.html

[guest325]

Or these if you need this sort of power:
http://www.hobbyking.com/hobbyking/store/__29414__Turnigy_Aerodrive_SK3_4240_620kv_Brushless_Outrunner_Motor_UK_Warehouse_.html

[ChrisH]

Or these if you need this sort of power: 

8 of those on a Carbon Core 650 X8 config should fly - like a rocket!!   

[guest325]

8 of those on a Carbon Core 650 X8 config should fly - like a rocket!!   

I have got one of them on a Multiplex Mentor set up as a glider tug and if it';s not towing I get unlimited vertical, will prophang and climb out which is unheard of for this model! Very nice motor for the price, well made and excellent performance.
What you need to think about is that you don';t have to use full power!
If you want ultimate grunt look at these
http://www.hobbyking.com/hobbyking/store/__38037__Turnigy_Aerodrive_SK3_6374_192kv_Brushless_Outrunner_Motor_UK_Warehouse_.html
These are used by people who want to replace 50cc IC motors with electric in mainly scale models.
- but I dread to think of how top power these in a multi     

[Rappy Freak]

I like the look of the SK3_4240.  Been having a look at these http://www.hobbyking.com/hobbyking/store/__26960__Turnigy_Multistar_4822_690Kv_22Pole_Multi_Rotor_Outrunner.html

Wish I could just see a motor and say yes that right lol.  Looking to use 11" props using 2 4s battereis....still like the SK3s

[SimonS]

I have a set of 6 TigerMotor MT2814';s that came off my CarbonCore H6-950 when I upgraded to MN4012';s and 6s if you are interested.

[Rappy Freak]

PM';d you 

[ktnch]

Adam got them motors if you want a look matey, also think flying will be off this weekend as heavy rain and thunder is on the forecast ffs