Crius AIOP V2 and Minim OSD + MultiWii Solved

[realpastaman]

I have had some experience with MultiWii 328 based flight controllers and Minim OSD.

I';m just upgrading to the AIOP V2 + MultiWill and I want to use the Minim OSD on this.

Does anyone know which serial port to use for the Minim OSD? I want to use serial 2 for the GPS and was hoping to user either serial 1 or 3 for the Minim?

I didn';t want to use serial 0 as I would have to disconnect the minim when I want to upload a new sketch?

Many Thanks

[Gaza07]

Hi realpastaman and welcome to the forum serial 2 is mostly used for the gps but as far as i know you can now use the osd on serial 1 or 3 because the telemetry is present on all the ports rather than just port 0 like in 2.1 

[realpastaman]

Hi realpastaman and welcome to the forum serial 2 is mostly used for the gps but as far as i know you can now use the osd on serial 1 or 3 because the telemetry is present on all the ports rather than just port 0 like in 2.1 

Thanks Gaza07 my AIOP V2 should arrive today and so will try ! Having all these ports is a luxury for me! 

[realpastaman]

Thanks Gaza07 my AIOP V2 should arrive today and so will try ! Having all these ports is a luxury for me!

Thanks for your help on this one Gaza07 - Im pleased to say that the Multiwii + Minim OSD + AIOP V2 is working well (serial 3). I do have a power up problem like others have posted and Ive done some measurements on this. I will post on the same topic as others on this.