This was supposed to be a budget build

[Jazzz]

it will stand me at £120 not cheep realy but that includes
An extra motor and esc for spaires

[nub]

fs that';s cheap as chips min

[Paul01]

Was thinking the same.

Being a Yorkshireman I aways have an urge to payless though 

[Jazzz]

It flys just the kk2 and emax 20 amp esc make for some
Interesting handling ... Now I';m used to the naze I eat my words the naze is miles better than the kk2 on a back to back flight.
http://youtu.be/UXykURE2qkU

[guest325]

It flys just the kk2 and emax 20 amp esc make for some
Interesting handling ... Now I';m used to the naze I eat my words the naze is miles better than the kk2 on a back to back flight.
http://youtu.be/UXykURE2qkU

Wash your mouth out you traitor, ::) ::) ::)

[Jazzz]

The motors are good though darrellw I';m still not going to change the kk2 but the esc are going I only put them on because I had no Bec for the little bee if I can get it to handle ok this will be a fast 3 cell its early days with the motors but I like the fact Thay don';t pick up lots of mud when Thay crash Thay only have small cooling holes
And Thay look a lot better in real life than in a pic
And I';m still trying to get the right prop combo the motors
We';re running hot on 8045 and the 6040 are a bit slow .
It';s was faster on the 8045
What props did you use on the motors

[guest325]

If they are the 2212 2200 kv I used 6x4';s but if you want speed go 5x5.
Speed = smaller diameter bigger pitch, torque (climb rate) = bigger diameter smaller pitch. On a 450 frame I can build a decent model for under £100 because what I want from it is different, a 450 racer needs big power and so will not be cheap. My 450 on those motors was clocked over 100mph but run time was less than  3 mins on a 4s2200; don';t go there, it';s not nice to fly!!!

[Jazzz]

If they are the 2212 2200 kv I used 6x4';s but if you want speed go 5x5.
Speed = smaller diameter bigger pitch, torque (climb rate) = bigger diameter smaller pitch. On a 450 frame I can build a decent model for under £100 because what I want from it is different, a 450 racer needs big power and so will not be cheap. My 450 on those motors was clocked over 100mph but run time was less than  3 mins on a 4s2200; don';t go there, it';s not nice to fly!!!

I was hoping to do a bit of everything with it I';ve put self level on as well so I can try fpv ... Again but just for flouting
Around enjoying the scenery I think I';ll try 7040 and 7045
If Thay make them ..

[Britishguy]

you got done £100

[Jazzz]

you got done £100

Ha ha ha we all get done ...but on this occasion I only needed the motors the rest I had lying around form other
Projects I just toted up what it would have cost ...
So realy it cost me £28 quid for 4 motors and another £7
For a spair Lol

[Soler]

I thought it was a bizarre window climbing bot... then realised it was a squiffy photo

[shawdreamer]

I thought it was a bizarre window climbing bot... then realised it was a squiffy photo

I was doing that too

was sat ere thinking to myself......... "budget build....ok yer I can see that.......... but why';s he put suction cups on it so it';ll stick to a window?, maybe he';s using double sided????"