What did the postman bring today?

[annikk.exe]

Two replacement KISS 12a ESCs arrived today.
Flyduino kept their word..  although it took a very long time to arrive.

[davethepitch]

Overcraft PDB V3 for my next rebuild so all i need to do now is measure the distance between the main support holes and then see which ZMR250 it fits. 

[PaulJC]

Today my Multistar 250 case arrived, it';s gonna need some mods to fit the Emax 250...






And also my Quanum V2 ';Goggles';...









I';ll get them put together later on today... I';ve not flown in ages really, gimbal frustrations and lack of time has had me curb my stuff for a few weeks, hopefully the arrival of these bits will at least get me out doing some FPV practice, i think the Alien and Gimbal might need a change of direction now as (yet again) i';m fed up with it lol

[agrs1974]

Hew Haw as I have been waiting 2 weeks on my order coming from HK 

[nub]

a couple of buzzers for my naze, courtesy of Revs on the board cheers!

[kilby]

The electronic postman brought me an email with this link http://youtu.be/Fcf6F1-n6y0

I ended up buying a ready built because boychild knocked my soldering iron over (and then stood on it) so the Armattan build service was cheaper than a new iron.

Needless to say I can';t wait, for a 258 it looks quite big and the 7 inch props should make it interesting

[quadfather]

The electronic postman brought me an email with this link https://youtu.be/Fcf6F1-n6y0

I ended up buying a ready built because boychild knocked my soldering iron over (and then stood on it) so the Armattan build service was cheaper than a new iron.

Needless to say I can';t wait, for a 258 it looks quite big and the 7 inch props should make it interesting

That';s pretty impressive!  Does he do an instruction video for every customer that buys a BNF kit from him?

I';ve been drooling over had the pleasure of handling a few of the Armattan frames at Phil';s stand at Weston (including the one you ordered).  The finish and quality is something else.  You';ll be very pleased, I';m sure.

[kilby]

That';s pretty impressive!  Does he do an instruction video for every customer that buys a BNF kit from him?

I';ve been drooling over had the pleasure of handling a few of the Armattan frames at Phil';s stand at Weston (including the one you ordered).  The finish and quality is something else.  You';ll be very pleased, I';m sure.

As far as I can tell yes (he sent me a couple of other 258 videos when I was thinking about ordering)

Well thinking about it a customer with all is fingers attached is a happier customer

I';ve been wanting one for almost 2 years (they used to be aluminium) and I just decided to bite the bullet on Tuesday afternoon.

Still have to order an RX and some 2200 Lipos but haven';t had time

Still hopefully the postie will be here soon (bloody 12th July closures are close)

[Dek]

2 Screamy lost model alarms, 2 more M8N GPS modules, FTDI-GPS cable, 4 GPS pucks and a new external compass module.

[james111]

He brought me my Chinese Naza comparable gps all the way from China in one week lets hope it';s any good 


Sent from my iPhone using Tapatalk

[kilby]

2 Screamy lost model alarms, 2 more M8N GPS modules, FTDI-GPS cable, 4 GPS pucks and a new external compass module.

Well keep us up to date with the Screamy as they could be useful

[tkboyle]

Today my ZMR250 v2 frame and PDB turned up overall the PDB looks fine. Will put it on the bench later and check soldering
quality.

[gb0wers]

Nothing, because I was at the allotment when postie arrived. Roll on 7am tomorrow.

[Revs]

Everything has turned up at once today I';ve got everything I need to complete the 4s 250 quad now![attachimg=1]

[tupoar]

My ZMR V2 + LED board cam mount has dropped this morning!

[attach=1]

[Revs]

Is that one of the fpvmodel ones, Tup?

[tupoar]

It is indeed mate. Will add it to my build log.

[Rommie]

My ZMR V2 + LED board cam mount has dropped this morning!

[attach=1]

well im hoping mine turns up today then tup, if it dont you should send me yours 

[tupoar]

Yea no worr... wait, WHAT??

[Gandhi]

Just some 850mah batteries from hobbyking in preparation for my 180 build when it turns up - Probably next week if the estimated ready date of 10th July is correct :)

[Paul01]

Dragonflyer 1806 motors, seem nice quality for the price

[guest325]

60A ESC for my Gemini and one of these:
http://www.hobbyking.com/hobbyking/store/__64679__Durafly_8482_EFX_Racer_High_Performance_Sports_Model_PnF_Yellow_Edition_UK_Warehouse_.html

[atomiclama]

A new frame for me to play with  ::)

http://hobbyking.com/hobbyking/store/__78517__Scarab_360_Folding_FPV_QuadCopter_With_Isolated_Cam_Mount_And_FR4_and_CNC_Alloy_Construction_KIT_.html

[attach=1]

I feel a build log coming on.

[kilby]

FrSky D4R-II

waiting on the parcelforce truck now

And the Armattan delivery too

[PropsToYou]

The most exciting of all deliveries...

WASHERS

[Kellarly]

Hopefully a set of Gav';s skews!!! C';mon postie!

[ched]

The most exciting of all deliveries...

WASHERS

Hope they sort out your prop tightening issue.

[Revs]

Some lipos for the 4s 250 Been using the A-Spec';s up to now, I hope these will perform as well..

[attachimg=1]

[Nige8021]

DVR now need to replace the BNC video connectors for Phono';s or phono';s on the Vrx for BNC';s 

[ched]

DVR now need to replace the BNC video connectors for Phono';s or phono';s on the Vrx for BNC';s 

Would love to know how you get on with the DVR.