rctimer voltage Current sensor vs aiop

[willumpie82]

hi

I bought a 90A currentsensor from rctimer (attopilot 90A compatible)
http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=861&productname=

i cant get missionplanner to read out the sensor, I checked the mpng configuration for any references but it seems that A0 and A1 has to be used. i configured mp at the std params for these pins. I checked the analog voltages from the sensor, the are a few hundered mA-s but when i connect the sensor to the board the voltages drop, so the pins on the crius are not configured as input i guess.

any ideas?

[willumpie82]

well, i got it working, I was being stupid and counted the connector the wrong way arround, on the bottom of the crius is the correct pinout

[Jumpy07]

Good one.. glad you got it going..

I managed to calibrate the voltage no probs.. but was a bit harder for the current.. and gave up in the end..   but someone on RCg got it sorted.. but had to edit in Arduino

[willumpie82]

Good one.. glad you got it going..

I managed to calibrate the voltage no probs.. but was a bit harder for the current.. and gave up in the end..   but someone on RCg got it sorted.. but had to edit in Arduino

ah, didn';t think of calibrating the current, good one, i';ll dive into it