300 folding quadcopter - Available now

[philtrum]

PREORDER for the 300 FOLDING Quadcopter Pure Carbon Fibre Frame





They are due in stock approx 25th November, so order for this quad will not be shipped until they have arrived

this is a light frame and with pure carbon fibre plates and arms

This is an amazing frame, very stiff and well machined

It has a party trick that  nothing else of this size has .... it folds for travel etc

will happily take a 7 inch prop, and for those that like to mod, its ripe for a v tail conversion, I hope to have a conversion kit available soon

Arm plate thickness: 3mm (redesigned to take both 2mm and 3mm motor bolts)
Main material: pure carbon fibre
Wheelbase: 300mm
With rubber damper to decrease vibration during flight for camera, this plate can be mounted on the top or bottom
Aluminum alloy spacers, light weight, reliable

http://makeitbuildit.co.uk/index.php?route=product/product&product_id=224

[Crob203]

Just bought one :) Any hints on how to setup the rear motors?!

[philtrum]

Hi

Thanks for your order

rear motors are easy, they just bolt to the underside of the arm rather than the top
remember to put the prop facing up as normal (so in a sense its upside down on the motor, if the motor was the normal way up) as you still want the prop to give lift

if you get stuck, shout

Cheers
Phil

[Crob203]

Ah so basically reverse the pitch on the motors :) No problem

[philtrum]

yeah so when viewed from above, all props face upwards as normal

[philtrum]

Available now

[Crob203]

Phil received but I don';t have nuts and bolts for the camera tray; any ideas what size I need and if they should have come with the kit?

[philtrum]

Hi Crob, camera tray is held on with the rubber/silicon bobbins

if your not talking about the little camera plate, drop me a pm with a pic and will sort out mate

Cheers
Phil

[Crob203]

So its flying :) I was a bit of an idiot on intial setup so had to get the CW/CCW motors fixed oops!

What rating are the gromits that are supplied with the kit?

[philtrum]

Hi im not sure, Id put a cable tie or wire through one if your mounting it on the bottom in case of any failure/damage