naming the connectors

[mvcorrea]

Hi there,

1st post, thanks for all your help,

A situation. I need to build some extension cables, but I noticed there are at least two kinds of that small connectors.
I';m looking to buy some leads with connectors attached, and I don';t know what to look for.
If any of you could name it from the picture I';ll appreciate.
The bigger is from a CRIUS AIO PRO FTDI port, and the smaller is from a gps (ublox gps module v2.0)

[quadfather]

Looks like the left one is a Molex PicoBlade and the right one a JST-SH aka nano JST.

[mvcorrea]

Hi QuadFather,

Thanks for you fast answer.
Any of those are known as "DF13"? or its other connector?
I';m researching on what kind/brand of those small connectors are.

regards

[quadfather]

I don';t know about the DF13.  It could be the same thing as a PicoBlade just from a different manufacturer (Hirose).    Both have 1.25mm pitch (distance between centres of pins).  To make things more complicated there';s also a micro JST with 1.25mm pitch.  That and cheap sellers like to use any of the names as they see fit.  Best thing to do is to measure the distance of two pins.  Common pitches are 1mm, 1.25mm, 1.5mm, 2mm and 2.5mm.

I think the uBlox uses 1mm nano JST connectors and the Crius 1.25mm PicoBlades.  Can anyone else confirm this?

[mvcorrea]

Hi again QuadFather,

Do you think I am abale to find a cable to match both connections?
As the gps have both I2C and Serial connetions I can use either of them, right?


For further reference the controller/gps picture.