Where to buy?

[agrs1974]

Hi folks.

I have added a pic of the servo connector I';m  after.

It';s the brown one in the middle of the naze board.

Thanks [attach=1]

[tupoar]

Go an old PC knocking about?

[agrs1974]

Go an old PC knocking about?

Lol dont think so why?

[Smeagol]

loads of those type of connectors in pc';s, a spare servo lead might do

[agrs1974]

Thanks guys. Can you actually buy them?

PS got the Rx sme. Will test today

Thanks

[Smeagol]

Look on flea bay for servo leads.

I could have sent some along with the vtx.

[agrs1974]

Damn lol
Thanks mate I will have a look

[dirtyharry]

Its a DuPont connector ,  servo lead is just a 3 way dupont

[cosmorogers]

If you want to make your own cables then you want something like;
http://proto-pic.co.uk/female-crimp-pins-for-0-1-housings-100-pack/

then some housings, these are 1x1, but can get all sorts (eg 1x3 for servo)
http://proto-pic.co.uk/0-1-2-54mm-crimp-connector-housing-1x1-pin-25-pack/

You can carefully use pliers to crimp the connectors, but if you are going to be making lots I would recommend you get a dedicated tool;
http://proto-pic.co.uk/crimping-tool-0-1-1-0-mm-capacity-16-28-awg/

Makes making servo cables, etc super easy.

You can also get male connectors if you want to make extension leads, etc.
http://proto-pic.co.uk/male-crimp-pins-for-0-1-housings-100-pack/

My Hex has quite a few custom cables on it now using the above :)

Hope that helps

[dirtyharry]

I get my dupont bits from banggood , its allot cheaper and some of it is in there uk warehouse. Prob not quite the same quality but none of my cables have failed so far ( touch wood).

http://www.banggood.com/buy/dupont.html

http://www.banggood.com/40-X-10cm-Female-To-Female-Dupont-Jumper-Wires-Cable-p-89717.html

[agrs1974]

Some great links guys thanks  ::)

Kepp up the great forum