Thats not what I ordered!

[shazzy]

Hi everyone!

I ordered some 12A Hobbywing Skywalker ESCs from Banggood, as they have N-fets.
http://www.banggood.com/HOBBYWING-SkyWalker-12A-Brushless-ESC-Speed-Controller-For-RC-Model-p-70383.html

They came today and I was going to flash them with BLHELI as they have the silab chips but was in for a bit of a  .

On the BLHELI pdf of all suitable escs, the image for the Skywalker 12A escs is this...
[attach=1]

But what my escs look like are these...
[attach=2]

Which is the same as the Turnigy Plush 12A ESCs...
[attach=3]

I know I';m being pedantic but the Plush 12A ESCs are not N-fets and I would like someone else to confirm that what I have is actually a plush ESC, before I raise a dispute with banggood.
Unless anyone else knows if skywalker ESCs have changed their PCBs.

[shazzy]

Do I flash these with blheli firmware for plush escs then?

Sent from my GT-I9300 using Tapatalk

[teslahed]

I have flashed turnigy plush ESCs with BLHeli firmware in the past. I have 4 on my line of sight teslaquad still;

http://youtu.be/osoddG5DSQo

They have always worked fine for me. But I';d not be happy if like you I';d ordered something technically better and got something different to what I';d ordered.

Are you sure about the delay on the turnigy plush';s? Have you got a link to more info please?

[shazzy]

Are you sure about the delay on the turnigy plush';s? Have you got a link to more info please?

sorry Teslahed i don';t know what you';re referring to!

[teslahed]

sorry Teslahed i don';t know what you';re referring to!

This picture you posted (which i assumed you';d put together to show goodluckbuy);



Shows a delay; 2.5uS in the FET driver that shifts the throttle range up etc. Makes them sounds less responsive than they should be. I was just wondering if you had a link to more info about that?

[shazzy]

Oh right! I think the slow response is due to mixed drivers (nfets and pfet) being on plush boards.

I have no other information aside from the fact I got this from this document that lists all supported blheli escs:

https://github.com/bitdump/BLHeli/blob/master/SiLabs/BLHeli%20supported%20SiLabs%20ESCs.pdf