1st completed build :)

[highlightshadow]

Hi all,

Well, my screws arrived this morning ...

Pretty happy ... not the tidiest but hey..

Got some new motors on the way cos i don';t like these Prop saver ones ... but they';ll work for now.

Ecks 230mm single-piece frame
Afro 12A ESC w/ SimonK
Turnigy Aerodrive SK3 3100kv motors
KK2.1 w/ Steveis 1.12S Beginner for now for maiden
Philtrum 3d printed battery holding plate - works so i can slide battery to achieve good CoG
Spektrum DSMX Sat
LED Strip lighting
Gemfan 5030 Props (yes i know in the pic they';re wrong-way wrong and have now been altered) :)

[Hands0n]

Nice first build. Looking forward to the video of it flying.

Watch out for those prop-saver mounts, they can ping off very unexpectedly with disastrous results for the multi-rotor.  I';d say inspect and replace any damaged o-rings before each flight.

[Jimbodiddly]

Lubbly jubbly!

Jim

[guest325]

Like it, that';s going to be a right little screamer with that kv motors - can';t wait to see (& hear) it ::) ::) ::)

[philtrum]

Looks good

glad the battery plate works well for you mate

Cheers
Phil

[highlightshadow]

Nice first build. Looking forward to the video of it flying.

Watch out for those prop-saver mounts, they can ping off very unexpectedly with disastrous results for the multi-rotor.  I';d say inspect and replace any damaged o-rings before each flight.

Yeah... hate them...
Have a set of ZMR 1804-2400kv motors on their way with proper prop mounts
http://www.myrcmart.com/zmr-1804-2400kv-micro-outrunner-brushless-motor-clockwise-p-6281.html

But for initial flights which will be gentle they (prop saver motors)  should be ok