Overiding Return to home

[scott1uk]

Hi Guys newbie here 

I have just purchased a 2nd hand DJI 450 Naza and got a friend to go through some of the setup with me on my Spektrum DX7. I have been flying it all afternoon and its awsome  ::) Just one thing that im puzzled by though, when i flick RTH it does the usual climb and tracks across to where it took off from and lands but if i intercept as it is coming down by flicking the switch back to GPS mode the LED';s change but i cant override the RTH until it lands and i spool it up again. Can anyone tell me if im doing anything wrong please?? Thanks in advance for any help but go easy on me ive got my head into the manual etc as we speak 

Scott

[usnooz]

I think you have to switch to manual to regain control

[johnrs]

Was just about to say that too.  Manual or Atti mode should do the trick

John

[scott1uk]

Thanks for the replies, any ideas how i can switch to manual or atti? I think its only setup for gps and failsafe on the gear switch and the aux switch.

Scott

[usnooz]

here are my dx6i settings



gear = reverse

mix 1
gear> gear act
rate d 0% u -104%
Sw mix trim inv


mix 2
gear > gear act
reate d - 49% u - 51%
sw ail D/R Trim Inh


gear travel adjustment up 86% down 76%


basically

gear switches between manual and gps.

switching mix to 1 puts it in alti

switcing ail d/r to 1 puts it in failsafe in even if its in alti gps or manual.

[Gaza07]

Hi Scott and welcome to the forum, I havent got a Naza so cant really help you with that but have quite a few Naza owners that should be able to help, they are a good friendly bunch on here and will help when ever they can  feel free to share any of your pictures or video';s   



oops looks like they beat me to it 

[scott1uk]

Appreciate the dx6i settings but seems to be in a different format for the dx7, Can anyone point me to any dx7 settings please

[homersainty]

ok i have naza and dx7 i have i have man gps failsafe on my fmode switch
manual is fmode 2 set at dn 86%
gps is fmode 1 set at up 84 %
failsafe is fmode n set at up 46 %
check these settings in assistant first but they should be close hope this helps 

[scott1uk]

ok i have naza and dx7 i have i have man gps failsafe on my fmode switch
manual is fmode 2 set at dn 86%
gps is fmode 1 set at up 84 %
failsafe is fmode n set at up 46 %
check these settings in assistant first but they should be close hope this helps

Hi thanks for this info can i ask is this with the old dx7 or dx7s as i havew the old dx7 as i am not sure how to assign switches.

[homersainty]

Old dx7 think its on aux 1 will check when i get home wot rx are you using ?

[scott1uk]

Im using the old dx7 and now ive sorted it and its working fine. Just been for a test flight in between rain showers and i can intercept RTH  ::) Thanks to everyone who contributed its much appreciated  ::)

[Gaza07]

Well done Scott feel free to share any pictures or videos you might have 

[Gav]

I use 3 position switch on my futaba for the AUX channel controlling GPS / ALT HOLD / MANUAL flight modes then seperate switch to introduce some offset and make it go into FAILSAFE RTH.  I have yet to try intercepting / cancelling RTH and regaining control in flight.   Must try it soon, so I know it is possible lol.   RTH is quite stressful to try for fun lol and I think I will only use for emergancy hehe