help REALLY needed - setup of iFlight DC-10 V2

[fab686868]

I beg anyone who knows something about drones, pids, filters and vibration, to give me a hand. I tried everything, i looked everywhere on forum and youtube, but i cannot find anything that help. I have unbearable vibrations with my gear. dc10 v2, xing 2814, propellers both 10x5x3 hqprop, and 8x4.5 master airscrew. heavy 8000mah li-ion battery. i got the pids from a friend with a dc10-v2 and a similar setup. but nothing worked. I have a devasating vibration on the roll axis, i have included in the link a folder with the images of my betaflight settings for pids and filter, and a snapshot with unfiltered and filtered roll gyro from blackbox explorer. clearly something is VERY wrong at least in the roll axis, but i just don't understand how to read this data, and i have nobody to turn to for help... thanks to everyone who will lost 5 minutes of time to read this and, is possible, give me a feedback. Fabrizio.

https://onedrive.live.com/?id=4E7DDD48D75DE089%2131244&cid=4E7DDD48D75DE089

[Bad Raven]

I suggest you binge watch a good number of Joshua Bardwell's set up video's on YouTube, far too much to write and be intelligible about here!

However, can say Master Airscrew props can be improved by throwing them as far away from you as possible, they are renowned for being un-aerodynamic nasty crude mouldings with poor airfoils and usually have atrocious balance.

I'd send you some more I have but I don't dislike you so I won't   

[ched]

This might be nothing but copying someone elses PIDs is generally not good UNLESS you are running exactly the same version of Betaflight.

I would start by asking your mate who gave you the pids for a cli 'dump /all' text file of his setup. From this you can see what version of BF he is running and then AFTER making a backup of your current settings (dump /all in CLI on BF - save to txt file) flash with the same version of BF but the one for your FC! Then setup from scratch using his dump file, adjust so your radio is setup correctly with BF. Triple check that all controls work as expected in BF and check if radio is switched off motors stop before putting props on or taking it outdoors. That should have a, as near as possible, replication of his setup.

Start from something that you believe works on a similar quad to yours and tweak from there.

[badger1]

you might like to try this forum:

https://intofpv.com/

they're usually pretty good at PIDs, blackbox data, etc.