FlySky FS-i6X Mod

[LuMan]

So, after realising that I'd bought the wrong thing when I got my FS-i6X, I decided to add a multi-protocol unit.. Then I saw a YouTube vid of an antenna mod.. 

So, I did a bit of a mod job on it and thought I'd take a few pics 

Here's a pure, unadulterated Tx


The added multi-protocol unit (which I posted in the 3D Print forum)


The bits. Well, the extra 2 antennas. You can see the original antennas in the stubby and handle.


Some folk add the external antennas on the handles, but I quite like them on the top of the body. So I drilled a couple of holes.


Then I added the leads and screwy-on-bits (technical term). It was a bit of a ball-ache, as I needed to remove the toggle switches on the front to get the screwy-on-bits (still a technical term) in.


Then I slammed the whole thing back together and screwed the antennas in.


Oddly, when I look at the pic now, it seems like the Tx is doing the YMCA dance....

Anyway, it was a bit of fun, and it might increase the range. But, most importantly, I hope it added a bit of light relief during lockdown.

Stay safe and keep smiling :)