Crius v2 and ppm pin on multi wii

[barneyg]

I';ve been running MegaPirateNG ... not had too many flights just yet but I was thinking of giving MultiWii a try out as a comparison as I don';t really want the Waypoint planning just yet ... I want to fly the thing not just hit a switch and have it fly in circles :)

I';ve been using ppm sum from my RX to the ppm pin on the Crius v2 board I';ve got.  While researching the settings etc for MultiWii I can see that there is not an official v2 board type in the defines yet and that there may be a problem with ppm sum input.

I found this thread in the multiwii boards :
http://www.multiwii.com/forum/viewtopic.php?f=6&t=2967

which basically is someone having issues and pointing out how it was done on MegapirateNG (which is what I do currently)  and then no real replies saying it works or how to go about making it work.

Anyone had any experiance with this and care to share how they have set up their config.h etc ?

[Jumpy07]

I had PPM running on the V2.0 with the V1.0 config  on Megapirate.. used A8.. NOT the ppm in pin on V2.0

Not sure if this helps.. as don';t know much about MultiWii.. but would suggest just using the same config for the V1.0 board and using A8 as the input.

[N7KI]

Just to make sure that you made changes to the special receiver section of Multiwii config.h file.  There are settings there for how the inputs from the receiver are setup that can be modified.  You probably have already done this but just in case you haven';t.