Gps NAZA M Lite

[Dippi]

the gps is working fine, the sky is clear. But IOC nor fail safe working. Led light sequence is 3 red 1 green and when i put on IOC - return to home, it is 3 red 2 green, instead of 3 red and 1 green and 1 orange.

[ched]

3 red = gps less than 5 sats.
See:
http://wiki.dji.com/en/index.php/Naza-M-V2_LED_Description
Check gps connections, are there any error messages in assistant?

[Dippi]

No error on the assistant.  The drone flies very good, excellent response to the stick inputs and smooth landings.

Could it be due to the falling steps i have take?
I could not go into compass calibration in GPS ATTI FAILSAFE mode.
So i calibrated the compass by going into GPS ATTI MANUAL mode and then just shifted back to GPS ATTI FAILSAFE mode.
Why was i not able to go into compass calibration mode in GPS ATTI FAILSAFE mode?
I tried to toggle the SW C as described but failed.

[ched]

Found this method has been successful for people:
- start with manual mode
- count 1 on first gps hit, and 2 on the second gps hit and so on..
- end on 7th count on gps mode.
- be quick

[Dippi]

Unsuccessful with the method you described Ched99

[Dippi]

after trying a lot of different methods, the only way i can get into gps calibration mode is by setting the SW C to GPS ATTI MANUAL and then reverting back to GPS Atti Failsafe. Later need to test in the field if the failsafe is working or not. It was not working today morning maybe due to the weather change.