APM Mini Throttle Problem

[JeremyE]

Hi

I have put an apm mini (from Hobbyking) in a ZMR250 frame with 1806 motors. However I cant seem to get the throttle working correctly. I arm and the motors spin up, I can then increase the throttle till the taranis is on 50%, but after that, the throttle just remains constant. Here is what i have done so far (multiple times):

- Calibrated Taranis in Mission Planner for APM
- Calibrated simonK ESC';s through APM

I am now a bit stumped as to whats limiting the throttle. Any ideas?

[hoverfly]

Not familiar with the Taranis but I would check the rate for the throttle channel, most t/x have the facility to extended the range too -110  and +110.
In mission planner note the rate on the throttle bar, in calibration screen ,this should coresponf to the t/x settings.
Next I would go to the failsafe screen and check the settings there.
Also remember to hit the save button.
As a final check go to advanced settings in mission planner and check the throttle range there.