Help with hooking up Spektrum "Satellite" Rx

[G-unit]

Hello,
I';m seeing if i can use the "Satellite Rx" with this FC like i can with the OPCC FC, if so can someone tell me how to hook it up.
I have found the 3.3v and ground on the board but don';t know where to put the signal wire at. ant idea ??
Thanks for your time.
G

[Gaza07]

Hi G-unit and welcome to the forum which flight controller are you trying to connect the sat to ?
I';m guessing you have one of the APM';s but which one

[G-unit]

Hi G-unit and welcome to the forum which flight controller are you trying to connect the sat to ?
I';m guessing you have one of the APM';s but which one

Sorry about that, 2.5 RCTimer Arduflyer.
Thanks G

[Gaza07]

Hi G-unit
I have no knowledge of connecting a spektrum sat to the APM even though I use spektrum ive always used a full rx normally a Ar8000, I did have a look around to see if other people are connecting sats directly to the APM and found a page about it here http://www.diydrones.com/profiles/blogs/ardupilotmega-spektrum-satellite-rx?id=705844%3ABlogPost%3A578858 It would seem you need an adapter and then have to flash the ppm chip on the APM it sounds like it might be a fair bit of hassle 

Also found this  http://diydrones.com/forum/topics/getting-the-ppm-encoder-working-how-to

[G-unit]

Hi G-unit
I have no knowledge of connecting a spektrum sat to the APM even though I use spektrum ive always used a full rx normally a Ar8000, I did have a look around to see if other people are connecting sats directly to the APM and found a page about it here http://www.diydrones.com/profiles/blogs/ardupilotmega-spektrum-satellite-rx?id=705844%3ABlogPost%3A578858 It would seem you need an adapter and then have to flash the ppm chip on the APM it sounds like it might be a fair bit of hassle 

Also found this  http://diydrones.com/forum/topics/getting-the-ppm-encoder-working-how-to

Man that was fast, I will have a look at it and see what it takes, and will let u know what i find. Thanks for your time and help.

G

[Gaza07]

Your welcome sorry I couldn';t be of more help 

[G-unit]

Im putting it in a Micro H frame so i need all the room i can get..

[Gaza07]

Very nice that';s a heck of a controller for a small copter  is the frame one of those 3d printed frames ?

[G-unit]

Very nice that';s a heck of a controller for a small copter  is the frame one of those 3d printed frames ?

U can never have to much of a FC... yes it is a 3d printed one..

[G-unit]

Well looks like a no go for now.. O-well i will do something else, maybe go with a FrSky Rx.
Thanks G