Crius AIOP v2

[brandnick]

Here goes,

Just received a Crius AIOP v2 board from rctimer, but I am having some trouble with the config

I was able to compile and upload the to the board (megapirateNG2.8R3). The only change i made to the firmware was the sonar board from V1 to V2 as everything else seem to be correct.

I calibrated the esc';s everything is fine. However the problem starts when I arm the board and move the throttle stick it takes about 70% to get the motors moving.

I know it';s has something to do with the firmware because I was able to upload the aeroquad 3.1 firmware and it didn';t  require 70% throttle to get the motors to move.

Please can some explain or help me on the one

Thanks in advance

[Jumpy07]

Did you calibrate the radio using Mission Planner ?

[brandnick]

Yes I used the mission planner

[brandnick]

Found the problem
I using simonk 30a esc';s which requires that you calibrate the esc individually via the receiver and not through the flight board.

Working perfectly now

[Gaza07]

Pleased to hear you solved your problem, thanks for letting us know how you solved it I';m sure the information will be helpful to others 

Found the problem
I using simonk 30a esc';s which requires that you calibrate the esc individually via the receiver and not through the flight board.

Working perfectly now