HK Camera Switch Hookup!

[jimbo385]

Hi,

I have the same switcher and run a Taranis in D16 mode  for Multirotors where I have channels 1-8 via sbus for my Pixhawk and channels 9-16 as analogue for Retracts, Camera Tilt, OSD switch & Video Switcher.

Here is the link. http://www.hobbyking.com/hobbyking/store/__29651__Hobbyking_3_Channel_FPV_Video_Switcher.html

I will have 3 cameras mounted plus a Minim OSD & Mavlink. A Gopro & Mobius (Or 808#16) powered by their own battery and a CCD camera which is 12v along with a Boscam TS832 transmitter.

I';m a bit flummoxed as to how to hook this lot up! I wanted to get the OSD on the CCD camera only but how? I really don';t want to fry any of the components!

Do I just plug all 3 cameras into the video switcher including the 12v from the CCD camera?

Many thanks.

[jimbo385]

Got it working finally with the MinimOsd. The mavlinkosd wouldn';t allow me to bridge the 5v rail to the camera side.

All working fine now.