Tarot 680 Pro issues with build

[Rich]

Hey all

just got a Tarot 680 pro as per title and i got some issues regarding the clips for the legs and arms. They are really tight , I mean really tight has any one else had similar issues ??

So far the frame build is going great except for this one issue.. 


thanks for your time hope you can advise 

[jimbo385]

I am hoping to get this frame.

I understand that to start with they are quite tight but will loosen up with use.

[Rich]

its a lovely frame no issues with bits missing so top marks on that. even had a few  spares in the box

Its just they seem overly tight and id hate to snap the things.

[RCJardin]

Who supplied your 680pro?

[Rich]

from this add on ebay

http://www.ebay.co.uk/itm/Tarot-FY680PRO-Hexacopter-Foldable-Carbon-Fiber-Frame-TL68P00-6-axis-Multirotor-/381009501727?ssPageName=ADME:X:AAQ:GB:1123

[Cloudbuster]

Am i right in thinking your talking about the tube clips that hold them in place when unfolded ??? If so it can depend on the colour of them (know this sound mad !!!) but the red and white plastic ones are less flexible than the black ones for some reason !!! They will slacken with use but the red and white ones are prone to breaking especially when very cold !!! The 680 frame is very good and should serve well but i always recommend a few spares ordered.... Always keep a couple of tube clamps as spare also a couple of spare motor tubes which will also double for landing legs if you trash one also wise to have a spare landing leg as they are fairly easy to trash with aheavy landing !!!!

Regards rob

[Rich]

yeah Ive spent a few hours trying to persuade them to comply ... eventualy i managed to get them from closed (foleded) to open (fly mode) and back again was a bit scary at times but they do seem to be easing up a bit

think ill leave the legs alone

i was thinking of getting another and keeping it as a spares but i wnt to get this build up first.


thanks for your input all

[redford]

Red is to determine the front folding arms iirc. I had issues with vibrations in flight from the clips not being tight enough. Changed to a T960 and never looked back!