DJI TX and non DJI esc's

[Chris650]

Hi All, I am in the process of putting a hex together and have to use whatever I can of my old Phantom workings, before I buy two more DJI esc';s, is it possible to calibrate NON DJI ones using the standard DJI Tx?
Working on a shoestring at the moment so buying a new Tx/Rx is not an option (although I will do at some stage)

Any advice appreciated.

Chris

[Britishguy]

your not mixing escs are you? that is a bad idea.

if not then you could go with afro escs because they dont need calibrating

[Chris650]

Thanks for the info, no, not mixing them, wanted to go one way or the other.
So 6x http://www.hobbyking.com/hobbyking/store/__42549__Afro_HV_20A_MultiRotor_ESC_High_Voltage_3_8s.html would be ok without needing to calibrate?

[Cloudbuster]

this is the problem with DJI just stopping supply ...the 30A opto';s have been widely used and now if you want replacements for whatever reason they are no longer available !!! i find this a worrying situation as it seems DJI are putting very short shelf lives on their products...

regards rob 

[Britishguy]

Thanks for the info, no, not mixing them, wanted to go one way or the other.
So 6x http://www.hobbyking.com/hobbyking/store/__42549__Afro_HV_20A_MultiRotor_ESC_High_Voltage_3_8s.html would be ok without needing to calibrate?

correct if its the same as the none hv version

[Chris650]

You are a star, thanks :-)

[Britishguy]

its cool