APM 2.5 3D printed anti-vibration mount

[philtrum]

Just realised that the original top plate might have been a bit difficult to print on some printers.  I';ve added a flat version that will make printing much easier, but means you';ll need to use your own M3 standoffs.  These should work fine:

http://www.hobbyking.com/hobbyking/store/__22733__5_6mm_x_14mm_M3_Nylon_Threaded_Spacer_10pc_.html

thats a good idea, i printed one for chris to try, but the support material was not easy to remove, so i sliced it up in netfab and took the pegs off, printed lovely then

Chris, you will have post soon

Cheers
Phil