naza firmware update

[homersainty]

naza firmware update is here at last  ::)
What's changed?

1. PPM Receiver Supported
2. Multi Gimbal Servo Output Frequency Supported up to 400 hz
3. IMU Calibration for eliminating gyroscope bias at the push of one button

i do not have a gimbal so can not comment on that part
but gps hold seems to be even better you want to make sure that you have your frame as level as possable
http://www.dji-innovations.com/products/naza-multi-rotor/downloads/

[Gaza07]

Thanks for the link Homer we have a few Naza flyers so im sure they will find it very useful, do you have to recalibrate every thing when doing a firmware upgrade like you do with most other flight controllers ?
I would imagine things get reset the same as the rest of them, you may have to do the compass calibration dance again 

[homersainty]

yes check your settings all m mine were OK apart from battery management had me down to under 1 min flight on a 2200mah battery a little fiddling with battery management settings sorted that

[Balders]

yes check your settings all m mine were OK apart from battery management had me down to under 1 min flight on a 2200mah battery a little fiddling with battery management settings sorted that

I haven't spent any time on the battery management yet.  What sort of settings do you have on a 3S 220 (as that's what I'll mostly be using).  Would you mind posting a screenshot if possible?