bit of info please guys

[paulcobra]

Right decided to go the all in one pro route, what other bits do I need for powering this up etc, on my helis it was done through the esc. Also do I need to do any programming?  & anyone got a rough guide for setup? I have found a guy on Ebay doing these in the UK for 45 + 3 quid post is that reasonable or should I just order my frame etc and flight controller from rctimer

[Gaza07]

I would just hang fire because the word is the AIOP v1 is going to be replaced by the v1.1 not sure what the differences are yet but it might be worth waiting, the gps has just been updated to v2 and is quite a bit better 

I have the AIOP v1 now out of date and 2 x Cn-06 v1 gps modules now out of date its getting rather annoying 

[Gaza07]

Here you go Paul the new one is now on the site, just didn't want you to buy a v1 then find out it changed to a v1.1 the next day 

http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=765&productname=

Not sure what the changes are besides coloured plastic around the pins and a beefed up usb port 

[paulcobra]

Just ordered one, along with the nav unit, v2 GPS and the 450 frame with motors,esc and props. Paid the extra 2$ post like you recommended .

[Gaza07]

When you say nav unit do you mean the Gps ? or have you ordered a nav board Im asking as you dont need the i2c nav board with the AIOP 

[paulcobra]

I ordered both, are there any other sensors that I might need or any other bits, I'll just sell the nav board or swap it maybe.

[Gaza07]

long as you have the AIOP and GPS on order you should be fine, you might want a blue tooth module and maybe a sonar but not essential, although once ive loaded the firmware I always connect via blue tooth to avoid the pulling the usb port off 

Just thought I would add you don't need a sonar for multi wii its not supported yet 

[paulcobra]

Need to look into how many channels I need on the ex now and how IM going to power both.