Crius AIO Pro V1.0/V1.1 MegaGuide Manual for MegaPirateNG

[lakis21]

Same problem as John, wired correctly but no sync in gps/arming/disarming.

I think it';s because we have a aiop V2 board.
On the v2, pin 32 is not actually a pin, but a solder (tiny)pad.
I saw a post on another forum where that pin/pad "32" was adressed as "42" in the mpng code.

I';ll post my findings when I get the leds and the buzzer working on the V2.

Thanks for the infos!

[Phil1970]

I am a bit confused here. In the picture from lakis I notice the wires to the ULN2803A are (on a aiop v1) nrs 5 ans 6.
Still, in the code you are using A2 and A4. Should';nt that be A5 and A6?

[lakis21]

I am a bit confused here. In the picture from lakis I notice the wires to the ULN2803A are (on a aiop v1) nrs 5 ans 6.
Still, in the code you are using A2 and A4. Should';nt that be A5 and A6?

Hi ,
In this example I am Using tge A4 and A5.  (yes it is the No 5 and No 6 wires)
wires:
1 => A0
2 => A1
3 => A2
4 => A3
5 => A4
6 => A5
7 => A6
8 => A7
I am using A5 for motor arming
and A4 for GPS FIX.

[SeamusOD]

Is the JD-IO board still needed now with megapirate 3.0.1R4 for frsky tele

[voo2doo]

Thank you.
J