HAL QUAD my second attempt

[Falcon26]

mostly built and mockedup going to wire and test
HK HAL Quad Frame
rctimer 4215/12 motors
20 amp ESC
Fatshark250 5.8
fatshark Pilot cam
two axis stable camera for gopro
Ill keep you abreast of my progress
CriusAIO pro v2  megapirateNG 2.8 r3  mavlinkosd Extra

[Gaza07]

Very nice looking quad look forward to seeing it fly   

[nub]

looks good, that';s some stack up top

[fruitsalad]

nice looking build,how you find them legs??
dont look as they can take a rough landing..

[Falcon26]

Well the adventure continues the tall stack is to conserve space, power distribution deck, flight control, Mavlink OSD, GPS and a bunch of wire. the pilot cam in front and Video tx in the back and the camera frame driven by two or three servo';s not sure yet the carbon fiber legs are a little flexi if that';s a word but that is what was in the box
The board is loaded with MegapirateNG 2.8 r3 and the it arms off the transmitter need to decide on what flight modes to program in to tx I did update the advanced parameters in mission planner So and So3 for OSD link if it stops raining I';ll stick some props on it and see if it looks like wants to fly that is it for now

[Falcon26]

Ok today was to be the big day began the pre flight and found one motor did not start until 1/4 throttle after the checkout found one of the ESC';s very hot and failed ordered new ESC';s and connectors and we';ll try again in a week

[Ross]

....... found one motor did not start until 1/4 throttle after the checkout found one of the ESC';s very hot and failed  and we';ll try again in a week.

Not to worry..Boeing had  (still have?) the same problem on the Dreamliner

[pete-c]

Not to worry..Boeing had  (still have?) the same problem on the Dreamliner

Aah but that was the battery not the esc.

Pete

[Ross]

Still did not fly tho';