Assembling the DJI Flame Wheel

[Opto-Mystic]

When I built my Flame Wheel, I set my GoPro above my desk and filmed each stage in HD. The video below has been processed to create a faux time lapse version.

Assembling DJI F450 Flamewheel (Faux Time Lapse)
Best viewed in 720 HD

[Opto-Mystic]

Although the video does not show it, I took the precaution of using ';BONDLOC'; Theadlock on all bolts.

Instead of using hot melt glue or epoxy to insulate the ESC connections on the power bus, I used transparent silicone bathroom sealant. Very effective.

[Marklincs]

Top tip,

before you use thread lock on any screw

Clean the Screw with white spirits 1st to remove any oils/grease from the production stage

Otherwise thread lock won';t bind as well as you expect it to.

[Opto-Mystic]

Totally agree Mark, However the Bondloc B243 that I used is oil tolerant and the threads do not need removal.
http://www.bondloc.com

The bolts release nicely if needs be

[hexadec]

Great video...I wish I had it to refer to when I built mine... ::)