AlexMos Gimbal and Sensor (WHERE TO BUY)

[VinHex]

I';m trying to get hold of the above..  if you know where to buy could you let me know..  If you have one for sale PM me ..

Thanks

Vin

[mickyt]

Vin they are for sale on fleabay or just type in Yun-1 gimbal that should take you to a link for the web site

[SimonS]

I';ve just had a look and I can';t see any AlexMos boards on eBay.

There are plenty of ';Open source'; boards but they are not the same. They will not run the AlexMos firmware.

[VinHex]

Thanks for looking out guys.
I';ve sourced in France.. Not used supplier before requested quick ship.. Lets hope it comes through the door..

[rcjarvis]

So did you get it ? All suppliers seem to be out of them... Here';s the link from the official Alex Mos website to their retailers :
http://www.simplebgc.com/eng/buy/

Dan

[VinHex]

Thanks Dan I did manage to get it from ladroneshop In France just resetting again now for NEX5 as I was using a GoPro at first..

Thanks for the update the buddy

[powerlord]

Worth looking at comparison videos though. Most show that properly set up there is very little difference between Martinez and alexmos

[rcjarvis]

I think the only difference so far lies in getting to connect and program the board... I know my rctimer (Martinez) gives me a hard time just connecting to it... All I know for now, is I should have left the stock settings alone...Balance the gimbal perfectly... Now that I messed with pid';s and I can not connect to reert....

Dan

[powerlord]

I think the only difference so far lies in getting to connect and program the board... I know my rctimer (Martinez) gives me a hard time just connecting to it... All I know for now, is I should have left the stock settings alone...Balance the gimbal perfectly... Now that I messed with pid';s and I can not connect to reert....

Dan

they all suffer from a problem with the newest FTDI drivers (on windows - mac works fine), so that needs doing:

http://www.multi-rotor.co.uk/index.php?topic=2318.msg19195#msg19195

With the latest 49RC2 that came out a few days again I';d say it';s right up there with the alexmos - it doesn';t overcorrect anymore, and allows far higher P and I for faster movement than before.

I hope they are going to do a 3 axis though, but for now it';s pretty excellent.