Naza m lite compass

[apollo7]

I i fitted a new Naza M lite to the Hex 550, darned if i can set it to compass calibration, according to the www. i should move the mode switch 11 times, but this info assumes i have it set to Manual-Atti-GPS............mine is set up to GPS-Atti-failsafe RTL.
I dont want manual mode on it, so how do i do compass cal?

[Gav]

I have GPS-ATTI-ATTI  then another switch to add an offset to the flight mode to envoke Failsafe.

I just reprogrammed it with the assistant to GPS-ATTI-FAILSAFE.  Rebooted and flicked the flight mode switch three or four times between POS 1 - 3 (GPS - ATTI - FAILSAFE)
Yep it went into calibration mode no probs, so you will be ok.

[apollo7]

I have GPS-ATTI-ATTI  then another switch to add an offset to the flight mode to envoke Failsafe.

I just reprogrammed it with the assistant to GPS-ATTI-FAILSAFE.  Rebooted and flicked the flight mode switch three or four times between POS 1 - 3 (GPS - ATTI - FAILSAFE)
Yep it went into calibration mode no probs, so you will be ok.

Gav, is your m lite standard or flashed to V2, last time i tried it it would not go into compass cal, mine is as it left the shop.......i need to set it up in assistant again as gains were way of

[Gav]

running a v2

[apollo7]

Might have to see if i have the brain power to upgrade to V2 

[Dippi]

Hi apollo7.
to calibrate the compass, its safe to say that the SWC has to be in GPS ATTI MANUAL mode
It does not calibrate in GPS ATTI Failsafe mode, at least it did not for me, i calibrated and then shifted it again to GPS anti failsafe mode.

About the V2, i tried the hack, it was pretty easy but my MC just did not play well with it kept overheating and the assistant also showed constant warning to further update it to the current version on the naza v2 assistant, but as a matter of fact you cannot update anything from the official naza assistant, i tried to further update and then it erased everything, this again requires to go and first install the M lite software and do the hack all over again.

I used my windows 7 machine for the hack but used my mac to connect to the naza assistant, so i don';t know how the naza assistant would behave on a pc after the update.

Hope this helps.