Help! CRIUS AIOP VER. 1.1 loss component.

[viktorres]

Hello. I';ve been testing my multicopter with a controller CRIUS AIOP VER 1.1.
But it detects a missing component and I have problems.
anyone can tell me that value of this component, apparently is a capacitor.
But I do not know the value.
I would appreciate the help.
greetings.

[Gaza07]

Hi viktorres and welcome to the forum I';m afraid I don';t have the same board as you so cant help to identify the missing part, but it looks to me like the solder pad has come off and wont be so easy to repair unless you clean some of the track and put the new part across that and to the other pad, hopefully some one will be able to identify your part or upload a good picture for us to look at 

[kym]

Yes, it';s a cap. I believe the chip next to it is a magnetometer.
The schematic for the 1.1 is around. I don';t have one.
Aleksey Kharlanov (rcgroups) says he has one.

[kym]

I think this little board has similar circuitry. My network connection isn';t good enough to get it at the moment.
Good luck!   

http://stuff.storediydrones.com/Mag_HMC5883L-listing.rar

[kym]

I found another doc for the Honeychook magnetometer and it seems to be a .1 mic bypass connected to pin 13 vdd. Value may not be particularly important. May operate fine without.

[viktorres]

Hi viktorres and welcome to the forum I';m afraid I don';t have the same board as you so cant help to identify the missing part, but it looks to me like the solder pad has come off and wont be so easy to repair unless you clean some of the track and put the new part across that and to the other pad, hopefully some one will be able to identify your part or upload a good picture for us to look at 

Hi thanks for the welcome Gaza07, I researched various data sheets and components will apparently on a 1 nF capacitor, I';ve soldier SMDs as the barometer of the rabbit controller, and I did with Iron.
I hope to get lucky again solder a capacitor
I will tell how I was.
Thank you! 

[viktorres]

Thanks for the help Kym .

I will do the tests and inform them of progress.!!