Classifieds

[JoeB]

Is there a min number of posts required to be allowed to sell stuff?

Im now happy with my current setup and want rid of all the bits i bought on my road to discovery lol

[GdLookinMingeR]

yes there is :-)
Welcome
Jay

[JoeB]

Cheers Jay.. what is the limit?

[Gaza07]

The limit is 30 posts   

[GdLookinMingeR]

Give us a preview
Of what';s up for grabs and we may be able to push your posts up to thirty 
Come on spell it out !

[JoeB]

I have some gps modules. Spektrum receivers. Dx6i. Various escs. Quite a few genuine sunnysky motors unused. Tarot 250 frame new. Another 250 unbranded frame. 2x naze Full boards new unsoldered. A few new orange r615x iirc receivers. Hubsan non-fpv quad with controller and batteries and case. F450 w/ naza lite pz4020 camera irc 600mw vtx and batteries. A 600mw vtx rpsma, irc 600mw vtx, fatshark non-race receiver module, another raceband fatshark module. Spracingf3 copy board from banggood, plus loads of other bits... big list lol

[JoeB]

Two d4rii receivers, a used naze acro, bags or bullet connectors, some servos, low voltage alarms, speedex complete kit inc escs pdb etc unbuild sealed bags.1s 160mah nanotech batteries new bagged about 30 of em.

[JoeB]

Er250 quad with retro fitted pz0420 camera never flown as the camera and vtx that came with it were faulty. A pz0420 12v runcam new. 2x ts5823 vtx';s. An x6r receiver new unboxed flashed to eu firmware.  Several ubecs 3A 5/6v types. Spektrum empty module case for taranis. 5 new mirco minimosds. 3 normal minimosds used.

[JoeB]

8x zmr 250 3mm cf arms, some f450 dji arms black. Ec3 connectors and ec3 charger cables, etc etc. Im a bit of a horder hate chucking stuff away no matter now little its worth.

[GdLookinMingeR]

I know exactly how you feel.
I have eleven boxes of tricopter parts, booms arms, landing gear carbon tubes, carbon box section, kk parts, naze parts,cc3d, f1. f2. f3 not got to f4 yet lots of old multiwii stuff and motors, bell750kv motors, mini beats motors, soft mounts that i set up in 2014! and now it';s soft mount your motors on your 250!
and so much more
Enjoy
keep posting your nearly there :-)

[PaulJC]

I must admit, i really need to do a clear out too....

[nub]

have a pile of stuff myself but it';s not worth the hassle of sorting out etc just to punt it for pennies.

and that';s if anybody wants to buy the stuff in the first place.

[Rommie]

What esc have you got and I';m after a new FC for my tri too so what ya got

[nub]

i have a Tri sitting in bits as i smashed up the yaw mech, your more than welcome to the RG20A';s that will more than likely never be used again but you';ll have to solder new power and signal wires to them.

[JoeB]

Mine are tgy plush 12A with blheli on them.

[Gaza07]

Ive got a few Rabbits but I';m not sure I would part with them 

[Rommie]

i have a Tri sitting in bits as i smashed up the yaw mech, your more than welcome to the RG20A';s that will more than likely never be used again but you';ll have to solder new power and signal wires to them.

sounds good nub what ya after for em and what motor you running on it

[GdLookinMingeR]

P.M. again :-)