Turnigy Receiver Connection to APM 2.6

[JAdame]

I purchased this controller + Receiver: http://www.hobbyking.com/hobbyking/store/__62710__Turnigy_TGY_i6_AFHDS_Transmitter_and_6CH_Receiver_Mode_2_.html

I was wondering how I should go about connecting the receiver to APM 2.6.
Will what comes with this controller be enough or will I need an external power supply for the receiver?
Will I need any additional parts?
Or is this controller not compatible with APM 2.6?

[guest325]

Link doesn';t work, but you should be able to connect the APM to almost any radio gear (provided it';s not toy grade).
Power to the APM comes either from one of the bec circuits of your esc';s or if they are opto (no bec) from a separate bec. There is a complete guide on here on how to use the APM FC, take a look at it; failing that  Painless 360 on YouTube has done an excellent setup guide.

[JAdame]

I';m sorry, the first post has been updated. Do I follow this diagram?
http://copter.ardupilot.com/wp-content/uploads/sites/2/2012/12/PWM-wiring.jpg

Is the link that you';re talking about in the stickied threads or somewhere else? Thanks again for your help.

My ESCs do have their own BECs.

[guest325]

Yes that diagram looks ok, Painless 360 vid:
http://youtu.be/30cCs4aHdB0