SPRacingF3 clean flight offset problem

[tony]

hi ive come across a problem with my 250 racer and the above fc and clean flight 1.9.0 
ok when i have my yaw offset to 90 degrees making it easy to get to the usb port all is good but when i also add 10degree pitch in it gose screwy and flys off in a 45 degrees away from me and needs twice as much trim than i got to offer to get it to a none moving hover is there a fix for this

what im going to do is just sit the board on a 10 degree angle and not set the offsets but that seems a bit strange if you ask me

[Revs]

What';s the pitch for, tony?

[tony]

I';ve got a 10 degree pitch on the motors

[bazzerh]

in the dynamic modelview, does it all look correct and move properly? if you';ve added 10deg motor mounts and compensated with 10deg pitch alignment then the model view should look level when your motors/props are level.

[tony]

 ok in the cold light of day
I';ve added the 90 degree yar and place the board in sideways so i can get to the usb which all works fine when i add the ten degree to pitch it still adds it to the forward racing board which is facing right hand side of my quad
so ive now changed it to -10 roll and now its added it to the forward facing of the quad thanks for reminding me to se the quad image on the first page of clean flight its now sorted  hope this help other with the same problem

[bazzerh]

when messing with board alignments its always a case of trial and error with the modelview to get it right, you can never get it right first time, sods law and all that

[tony]

One last question I nearly got it flyingbthe way I want it but I have forgotten how to add expo.on taranis and always did it via daseflight but cleanflight dose not seem to have this option on the pics screen am I missing something
Are should I stop being lazy and.do.it via taranis

[Steve Farrimond]

It';s very easy in the radio.

Have a look at this,
https://youtu.be/WpYO7HkjxGQ

I';ve used painless360 and his videos to get everything on my first quad working. He always answers any comments also. The above is a 12 part series. A few hours and I  now know my taranis inside out.