RC calibration issue on mpng 3.1.5

[Asaad_civic99]

Hi,

I have an HK AIO board, I have flashed my board with 3.1.5r2megapirate firmware using the latest version of the flash tool. I hooked up the board via USB and started the calibration process. When I got to the part of calibrating the RC, non of the sliders in the mission planner moved when I moved my sticks.
i am using an old FM transmitter with a corona synthesised Rx. I have choosen the PWM from A8 to A... In the flashtool before uploading the firmware. What could be the problem?

[SFC]

Most likely your old FM transmitter is PPM/PCM, not PWM. Corona';s synthesized receivers are PPM (I use the RP8D1 (9ch. ver.)).

Also for me APM Planner 2.0 did not work (nor did the flash tool for loading MPNG correctly), I use an older version of Mission Planner to calibrate my old school FM radio.
Maybe try flashing the Crius via Arduino (1.0.3).


SFC