Fatshark 1000mah Lipo issues

[Kellarly]

Whilst out flying my fatshark started beeping the low voltage alarm. Stopped flying, took it home and put it on a balance charge on my charger (2S 1.0amps).

The charger started but never went above 0.3 amps and tried to push the voltage over 8v, whilst only putting 345mah back in the lipo.

What might cause this issue?

[PaulJC]

What charger? Did it finish the charge cycle or timeout? What were the individual cell voltages after?

Anyway you look at it the outcome is probably not gonna be great :/

[Revs]

One of my FS batteries does crazy things to my charger too and I';ve no idea how or why. It doesn';t always do it, but sometimes I';ll plug the balance leads in and my charger will give me an external temps sensor warning... it doesn';t even have one. Sometime it pops up with a cell count error and if I go in to the voltage monitor it shows 4 cells all at well over 4.5v.

I';ve got quite a few other 2s batteries that have never caused an issue. The charger is a SkyRC T6200 200w.

[Kellarly]

iMax B6 charger. Charged ok before.

Mine kept coming up Connection Error so took everything off and restarted. I then stopped the charge as the voltage was looking weird and I don';t want to risk a lipo fire.

I';ve ordered another lipo anyway but it was very weird that it did this.