3d Printed Mount for Forward Facing Gimbal (Folding 300mm Frame)

[Crob203]

Phil,

I have had a play with a forward mounted gimbal on the folding 300mm frame; it worked ok but my frame lacked power and was transferring too much vibration to the gimbal. Im working on the first problem by upgrading escs, props and maybe motors but wondered whether you may be able to help me the later.

What I am after is two 3d printed parts that fit in to the 300mm frame. The first would replace the FPV part that spans the upper and lower frame and have fittings for rubber gimbals; possibly up to 8, 4 inside the frame and 2 either side of the support struts. The second piece would attach to the other piece via the rubber gimbals and have holes in to attach to the rear of the roll motor.

Very generic description but I dont have CAD, mite try and find a free tool and mock something up. Would this be something your printer could put together?

Chris

[philtrum]

Hi Chris

Sure, I';ve printed whole gimbals and mounting plates before

If you can sketch it out, that would be great, if you cant do the cad side, let me have a picture of what you want and dimensions, then we can see whats involved

Cheers
Phil