MegaPirateNG 2.8 R2 released

[Jumpy07]

http://code.google.com/p/megapirateng/downloads/list

=== MPNG History ===
--- 2.8 R2
Added support for FrSky telemetry (uses S1 on Crius AIOP, requires TTL / RS232 converter)
updated motor mapping table in the README.txt

Release Notes for MegaPirateNG 2.8 R2 (ArduCopter 2.8.1a)

=== How to compile MegaPirateNG ===

1. Download and install Arduino 1.0.1!!!!
2. See additional requirements for BlackVortex boards in the release_notes_BlackVortex.txt
3. Delete original libraries folder in Arduino IDE folder
4. Copy libraries folder from MegaPirateNG distributive into Arduino IDE folder
5. Select your Frame, Sensor, Tranmitter type in the APM_config.h (Quad X, ALLINONE by default)

=== Arduino board pin mapping ===

*** RC channels (can be changed in APM_RC_PIRATES.cpp) ***
* PPM SUM signal must be connected to A8 pin
* Default is TX_mwi - MultiWii set
A8   - ROLL
A9   - THROTTLE
A10   - PITCH
A11   - YAW
A12   - AUX1
A13   - AUX2
A14   - CAMPITCH
A15   - CAMROLL

*** Camera stabilization ***
d32 - Camera stabilisation Roll servo
d33 - Camera stabilisation Pitch servo
For BlackVortex:
d44 - Camera stabilisation Roll servo
d45 - Camera stabilisation Pitch servo

Serial ports:
OSD - Serial2 (RX2,TX2)
Telemetry (3DR, Xbee, Bluetooth) - Serial3 (RX3,TX3)
OSD (Remzibi, E-OSD, FrSky) - Serial1 (RX1,TX1)

*** Sonar ***
d9 - Sonar Tx
d10 - Sonar Echo

*** Status LEDs ***
d13 - RED
d30 - YELLOW
d31 - GREEN

*** LED Sequencer ***
A1,A2,A3,A4 - default LED sequencer pins (read more in led.pde),

*** Motor mapping ***
motor mapping (maximize your text viewer or disable word wrapping to avoid line breaks)
======================================================
Pin     D2    D3    D5    D6    D7    D8    D11   D12   - Arduino pins
CH      3     4     1     2     7     8     10    11    - MegaPirate output channel
MOT_*   3     4     1     2     5     6     7     8     - Arducopter motor mixer mapping
======================================================
TRI     -     BC    RC    LC    S     -     -     -
QuadX   LFW   RBW   RFC   LBC   -     -     -     -
Quad+   FW    BW    RC    LC    -     -     -     -
Hexa+   BLW   FRC   FW    BC    FLC   BRW   -     -
HexaX   FLW   BRC   RW    LC    FRC   BLW   -     -
Y6      LDC   BDW   RDC   LUW   RUW   BUC 
Octo+   FRC   BRC   FW    BW    FLC   BLC   LW    RW
OctoX   RFC   BRC   FRW   BLW   FLC   LBC   LFW   RBW
OctoV   BLC   BBRC  FLW   BRW   FFLC  FRC   FFRW  BBLW
Quad8X  BLUC  BRUW  FRUC  FLUW  FLDC  FRDW  BRDC  BLDW
Quad8+  BUC   RUW   FUC   LUW   LDC   FDW   RDC   BDW     <<< Not verified
======================================================

Motors description:
B- back
R- right
L- left
F- front
U- upper
D- lower
W- clockwise rotation
C- counter clockwise rotation (normal propeller)
S- servo (for tri)

Example: FLDW - front-left lower motor with clockwise rotation (Y6 or Y4)